TMCW6-F Non-contact Angle Sensor
1.No axle, non-contact, non-contact measurement
2.Small temperature drift, high resolution, good linearity
Introduction
TMCW series non-contact angle sensor uses currently internationally the most advanced integrated chip of magnetic resistance. By using magnetic signal non-contact induction, after signal processing of microprocessor, mechanical angle can be converted into standard signal output(4-20mA, 0-5V, 0-10V, 1-5V etc). Measuring range and output mode can be customized according to customer requirements. This sensor is composed of signal pickup and sensitive body.
Technical parameters
| Voltage output(TMCW6V-) | Current output(TMCW6A-) |
Working voltage | 10-30V,DC | 10-30V,DC |
Mechanical turning | 360° | 360° |
Angle measuring range(range) | ±5~±180°, 0~360°customized | ±5~±180°, 0~360°customized |
Resolution | 12-bit (4096) | 12-bit (4096) |
Accuracy | ±0.03-0.087° (less range, higher accuracy) | ±0.03-0.087° (less range, higher accuracy) |
Temperature drift (-20-80°C) | less then 0.5° | less then 0.5° |
Output signal | 0-5V,0-10V,1-5V or others | 4-20mA or others |
Consumption current(no load) | less then16mA | less then 16mA |
Load capacity | more then5KΩ | less then 500Ω |
Working temperature | Industrial grade -20-80°C Military grade -40-125°C | Industrial grade -20-80°C Military grade -40-125°C |
Level of protection | IP67 | IP67 |
Update cycle | 1ms | 1ms |
Remarks:1,During 0-360°multiturn measurement, there is 0.1-1° blind zone at the junction of 360° and 0°. 2,For 0-5V and 0-10V output, there is about 50mV base number at 0V. 3,If the sensor outputs 0-10V,it will require the working voltage of sensor is DC15-30V and input impedance (load capacity) is not less than 10KΩ.
|