analog angle sensor TMCW-Q series non-contact angle sensor
1.Measure and control angle
2.mechanical angle can be converted into standard signal output(4-20mA, 0-5V, 0-10V, 1-5V etc)
Brief introduction of product
TMCWQ series non-contact angle sensor uses currently internationally the most advanced integrated chip of magnetic resistance. By using magnetic signal non-contact induction, after signal processing of microprocessor, mechanical angle can be converted into standard signal output(4-20mA, 0-5V, 0-10V, 1-5V etc). Measuring range and output mode can be customized according to customer requirements. This sensor is developed specially for electrical system of automobile and can substitute for RPN rotary position sensor produced.
Technical parameters
| Voltage output(TMCWQV-) | Current output(TMCWQA-) |
Working voltage | 10-30V,DC | 10-30V,DC |
Mechanical turning | 360° | 360° |
Angle measuring range(range) | ±5~±180°, 0~360°customized | ±5~±180°, 0~360°customized |
Resolution | 12-bit (4096) | 12-bit (4096) |
Accuracy | ±0.03-0.087° (less range, higher accuracy) | ±0.03-0.087° (less range, higher accuracy) |
Temperature drift (-20-80°C) | less then 0.5° | less then 0.5° |
Output signal | 0-5V,0-10V,1-5V or others | 4-20mA or others |
Consumption current(no load) | less then 16mA | less then 16mA |
Load capacity | more then 2KΩ | less then 500Ω |
Working temperature | Industrial grade -20-80°C Military grade -40-125°C | Industrial grade -20-80°C Military grade -40-125°C |
Level of protection | IP67 | IP67 |
Update cycle | 1ms | 1ms |
Remarks:1,During 0-360°multiturn measurement, there is 0.1-1° blind zone at the junction of 360° and 0°. 2,For 0-5V and 0-10V output, there is about 50mV base number at 0V. 3,If the sensor outputs 0-10V,it will require the working voltage of sensor is DC15-30V and input impedance (load capacity) is not less than 10KΩ. Features of product Application areas 1.Non contact, non-contact measurement 1.Measure and track angle in automatic control 2.Be adaptable to harsh environment with 2.Measure and control valve opening angle high reliability and long lifetime 3.Small temperature drift, high resolution, good linearity 3.Measure turning of servo motor 4.Small turning moment 4. Measure and control tension in textile, paper-making and other areas 5.Flexible and various measuring ranges and output modes 5.Measure angle of rotation for chassis and wheel of automobile |